0
You are here: Home Forum Using the Jaguarboard Troubleshooting My board died :(
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Using the Jaguarboard
Troubleshooting
My board died :(

TOPIC: My board died :(

My board died :( 1 year 1 month ago #321

  • moisesmcardona
  • moisesmcardona's Avatar
  • OFFLINE
  • New Member
  • Posts: 5
  • Thank you received: 2
  • Karma: 1
Hi, do you have other 5V/2A power adapters you can use to test if the board will power up? Maybe it can be a faulty power adapter.
The administrator has disabled public write access.

My board died :( 1 year 1 month ago #322

  • piranha32
  • piranha32's Avatar
  • OFFLINE
  • New Member
  • Posts: 11
  • Karma: 0
moisesmcardona wrote:
Hi, do you have other 5V/2A power adapters you can use to test if the board will power up? Maybe it can be a faulty power adapter.

I already tried. Did not help.
The administrator has disabled public write access.

My board died :( 1 year 1 month ago #323

  • piranha32
  • piranha32's Avatar
  • OFFLINE
  • New Member
  • Posts: 11
  • Karma: 0
piranha32 wrote:
Blank screen on monitor connected through HDMI-DVI cable. I'll try tomorrow with monitor with HDMI input.

I tried to connect the board to monitor with native HDMI input. Still no luck. Blank screen :(
The administrator has disabled public write access.

My board died :( 1 year 1 month ago #324

  • moisesmcardona
  • moisesmcardona's Avatar
  • OFFLINE
  • New Member
  • Posts: 5
  • Thank you received: 2
  • Karma: 1
Do you have any USB connected to it?
The administrator has disabled public write access.

My board died :( 1 year 1 month ago #325

  • piranha32
  • piranha32's Avatar
  • OFFLINE
  • New Member
  • Posts: 11
  • Karma: 0
moisesmcardona wrote:
Do you have any USB connected to it?
Nothing. When the board died only network cable and power supply were connected, today I checked with only monitor and power supply connected.
Anyway, the board worked fine for a while and froze in the middle of doing something, I've got the same result with two different power supplies and almost nothing connected to the board, so I don't think power supply is the culprit.
The administrator has disabled public write access.

My board died :( 1 year 1 month ago #328

  • tim
  • tim's Avatar
  • NOW ONLINE
  • Moderator
  • Posts: 213
  • Thank you received: 27
  • Karma: 4
Hi Sir,
Sorry for that! Can you take a short video to show the boot status? Blank? Means no signal on monitor ?
The administrator has disabled public write access.
Forum
Using the Jaguarboard
Troubleshooting
My board died :(
Time to create page: 0.193 seconds
Powered by Kunena Forum