I just got my second Jaguar board.
Unlike my first one, when I plugged it into power and HDMI I expected to see a command line screen or bios or anything.
what happened is that there where no HDMI signal. Also there was only ONE green LED nothing more -power led- on.

My second trial was to connect a SD Card with ubuntu on it. Again the same action happened.
Only when I take off the SD and put it again there is another LED next to the power LED turns on and keeps ON but again nothing happened.

Kindly advise.

Hi Sir,
Sorry to hear that.
Can you take a video and show us the status? And send me the SN number.

tim wrote:
Thank you for your reply,

Kindly refer to video https://youtu.be/N9i4XvWHdFk

I also took images of the board where IDs are listed.





I also want to mention that there is no power in the USBs. However when I insert a SD card then remove it and insert it again the LED next to the power board turns on. that is the only other led that turns on.

I have a friend who tried this brand but his one worked right away. I want to know if you have future planes to continue producing this boards and upgrading it to support USB3.

Regards

please try to remove the chip and try to boot again.



In some case, there is incompatibility with HDMI interface, can you try to change a monitor and see if works?

BTW, when did you get the jaguarboard? Did it work before?

Thank you for your reply,

I have two boards. One of them is working fine, and the other -this one- has never worked.
I removed that chip and again the same behaviour, Also I tried it already with different monitors and different cables that I use with the first board, but this board does not work.

regards

OK, sir.
Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for RMA.