I've made some instructional videos on how to successfully install Windows 10 and its drivers to your JaguarBoard. Please note that before installing Windows 10, you must have flashed the Windows BIOS in your board.
The following video will tell you how to flash the Windows BIOS once you have downloaded it and copied to a flash drive:
Once you have flashed the Windows BIOS, you can proceed to install Windows 10 Please note, the video is long, however, the first 20 minutes approximately is where I install Windows 10. The next minutes are about installing the drivers and installing the Windows Updates (which is why the video is long. You may skip the Windows Update part of the video).
I hope the videos are useful to you and I hope you enjoy using your JaguarBoard as much as I do!
P.S. If you have not yet got your JaguarBoard or haven't decided on purchasing it, here is an unboxing video for you
Thanks for the video explaining everything. I have some additional information to add:
-You do not need a wifi adapter, initially, to do the install. I tethered my android tablet via USB to my jaguarboard and I was able to access the internet. Just FYI.
-After installing all the drivers, my display was still 800x600. To fix it I forced the Windows Device Manager to install the drivers by going to: Device Manager--> Right-click on Microsoft Basic Display Adapter-->Update Driver-->Browse for my software-->Navigate to the folder where I exported the Drivers.zip file.
-Some drivers still fail after using the updated drivers for jaguarboard. Any idea how to resolve these? I've attached a picture
Again, thanks for the easy to follow video; it really helped!
Hy guys i am having problem with my windows 10 installation. The setup starts up but it wont show the Emmc flash drive or memory
if there is any fix to it any guidance will be appreciated ! (English is not my first language)